Specifications

Specifications of IBM 9783 195
Frame Relay Standard Rates: 9.6 kbps to 2.016 Mbps. (RS-232 rates in excess of
38.4 kbps are not recommended because of limitations in the physical signal slew
rates.)
Table 71. Common Data Rates for the HSP Frame Relay FRAD Ports
Table Notes:
1. Data rates are expressed in bits per second (bps).
2. All rates from 75 to 2048000 can be entered; however, if the value does not
divide evenly into 32768000, it is rounded to the closest evenly divisible rate.
D.2.2 Console Port Interface
The 9783 provides a single port with a male DB9 connector and is
switch-configurable to RS-232 or RS-485 operation.
The data rate is console-configurable to support the following data rates: 300,
1200, 2400, 4800, 9600.
D.2.3 Ethernet Interface
The 9783 provides a single connection through either a 10Base-T or a male
DB15 AUI connector. Either port operates as port 1 of the unit.
D.2.4 Miscellaneous
AC Line Requirements
: 90 to 125 VAC, or 180 to 250 VAC 47 to 63 Hz, 338
watts maximum
DC Line Requirements : -42 to -54 VDC, 176 watts maximum
75 4000 12000 29867 84000 256000
150 4267 12800 32000 89600 268800
300 4667 14000 33600 96000 288000
600 4800 14400 36000 100800 336000
1200 5334 14934 37334 112000 384000
1334 5600 16000 38400 115200 403200
1600 6000 16800 42000 126000 448000
1867 6400 18000 44800 128000 504000
2000 7200 18667 48000 134400 512000
2134 7467 19200 50400 144000 576000
2400 8000 21334 56000 149334 672000
2667 8400 22400 57600 168000 806400
2800 9334 24000 64000 192000 1008000
3200 9600 25200 67200 201600 1344000
3600 10667 28000 72000 224000 2016000
3734 11200 28800 74667 252000