Specifications

© Copyright IBM Corp. 2000 203
Appendix F. Command Summary
This Appendix provides a brief, annotated list of IBM 9783 commands. Depending
on the configuration, some of these commands may not be available. Parameter
values specified are maximum.
The abbreviation for the command is shown within parentheses. For example,
Call_Processing (ca) Command signifies that ca is the minimal coding
requirement for this command.
Command Description
Call_processing (ca) Command
Circuit group (cg): all (a) or 1-128. individual circuits (c): processing (p) or 2-255. Voice port (vp): all
(all), a specific voice port (v1-v8 for analog voice ports; v1a-v8d for digital voice ports) or a range (that
is, v1a-v2d).
1st_dig_t/o Format:ca1t
Sets the timeout (t), after which if the first phone
number digit is not received, the digit-direction
process terminates. Range: 0-10000 msec. Cycle
voice ports offline and back online to complete the
update.
Answer_delay Format:caad
Sets delay (d) that occurs before answer is
recognized. Range: 0 -10-10000 msec. Cycle voice
ports offline and back online to complete the update.
Busy_tone Format: ca b s1_on s_off s2_on s2_off f1 f2 l1 l2
Configures two signals that are used to generate
busy_tone. Enter:
1. Signal 1 ontime (s1_on). Range: 0-500-32767
msec.
2. Signal 1 offtime (s1_off). Range: 0-500-32767
msec.
3. Signal 2 ontime (s2_on). Range: 0-500-32767
msec.
4. Signal 2 offtime (s2_off). Range: 0-500-32767
msec.
5. Signal 1 frequency (f1). Range: 0-480-3000 Hz.
6. Signal 2 frequency (f2). Range: 0-620-3000 Hz.
7. Signal 1 level (l1). Range: (-40)-(-20)-(-13) dB in
0.5-dB increments.
8. Signal 2 level (l2). Range: (-40)-(-20)-(-13) dB in
0.5-dB increments.
Cycle voice ports offline and back online.