Specifications

204 IBM Voice Over Frame Relay Perform Guide
Clear_events
Circuit
Format:cacccgc
Clears call processing statistics for circuit group cg,
circuit c. Enter:
1. 1-127 to designate the circuit group (cg).
2. 0-254 to designate a specific circuit (c).
Clear_events Format:cacvvp
Clears call processing statistics for voice port vp.
Dial_tone Format: ca dia s1_on s1_off s2_on s2_off f1 f2 l1 l2
Configures two signals that are used to generate
dial tone. Enter:
1. Signal 1 ontime (s1_on). Range: 0-32767 msec.
2. Signal 1 offtime (s1_off). Range: 0-32767 msec.
3. Signal 2 ontime (s2_on). Range: 0-32767 msec.
4. Signal 2 offtime (s2_off). Range: 0-32767 msec.
5. Signal 1 frequency (f1). Range: 0-350-3000 Hz.
6. Signal 2 frequency (f2). Range: 0-440-3000 Hz.
7. Signal 1 level (l1). Range: (-40)-(-16)-(-13) dB in
0.5-dB increments.
8. Signal 2 level (l2). Range: (-40)-(-16)-(-13) dB in
0.5-dB increments. Cycle voice ports offline and
back online.
Discon_delay Format:cadisd
Sets the delay (d) after which a disconnect is
recognized. Range: 0-800-64000 msec. Cycle voice
ports offline and back online to complete the update.
DTMF Format: ca dt s_on s_off l
Configures dual-tone, multi-frequency signal. Enter:
1. Signal ontime (s_on). Range: 0-100-32767
msec.
2. Signal offtime (s_off). Range: 0-100-32767
msec.
3. Signal level (l). Range: (-25)-(-7) dB in 0.5-dB
increments. Cycle voice ports offline and back
online.