Specifications

206 IBM Voice Over Frame Relay Perform Guide
No_ans_ring Format:cand
Sets duration (d) that the voice channel will ring
FXO port while waiting for answer supervision
before abondoning a call. Range: 0-64000 msec.
Cycle voice ports offline and back online to
complete the update.
Off_detect_ring Format:caofd
Sets duration (d) required for absence of ringing on
FXO port before the IBM 9783 unit determines that
ringing has stopped. Range: 0-6000-64000 msec.
Cycle voice ports offline and back online to
complete the update.
On_detect_ring Format:caond
Sets duration (d) of ringing on an FXO port before
ring is recognized. Range: 0-400-64000 msec.
Cycle voice ports offline and back online to
complete the update.
Output_rule Format:caour(stringord)
Sets the output rule number (r) followed by output
rule string or d (delete output rule r). Output rule
number: 0-31.
R2
B
ackward_digits
Format:caR2bb(string)
FSets the contents of the Backward Dialing buffer
(b) for outgoing calls (only whenever the IBM 9783
must generate backward digits). String: 20
characters maximum (0-9, A-C, *, or #). Default:
11111111111111111116.
R2
Calling_category
Format:caR2cd
Sets the digit (d) that an IBM 9783 sends in
response to a Group A Request_Category signal
sent by the incoming register. This command is
applicable only when the IBM 9783 is operating as
the outgoing register. Digit: One character (0-1-9,
A-C, *, or #).
R2 Line_busy Format:caR2ld
Sets the digit (d) that is used by Group I to notify an
R2 subscriber whether or not the channel is busy. In
Normal R2 mode, this command applies to both
incoming and out-going calls. In Pulse_disabled
mode, it applies to incoming calls only. Digit: One
character (0-3-9, A-C, *, or #).