Specifications

208 IBM Voice Over Frame Relay Perform Guide
Ring_back Format: ca ri s1_on s1_off s2_on s2_off f1 f2 l1 l2
Determines two signals used to generate ring-back
tone. Enter:
1. Signal 1 ontime (s1_on). Range: 0-2000-32767
msec.
2. Signal 1 offtime (s1_off). Range: 0-4000-32767
msec.
3. Signal 2 ontime (s2_on). Range: 0-2000-32767
msec.
4. Signal 2 offtime (s2_off). Range: 0-4000-32767
msec.
5. Signal 1 frequency (f1). Range: 0-440-3000 Hz.
6. Signal 2 frequency (f2). Range: 0-480-3000 Hz.
7. Signal 1 level (l1). Range: (-40)-(-22)-(-13) dB in
0.5-dB increments.
8. Signal 2 level (l2). Range: (-40)-(-22)-(-13) dB in
0.5-dB increments.
Cycle voice ports offline and back online.
Route_rule Format: ca ro r (s or d)
Sets route rule number (r) followed by route rule
string (s), or d (delete route rule r). Route rule
number: 0-119.
Seize_ack_delay Format: ca seize_ack_d d
Sets minimum delay (d) before a unit generates a
seize acknowledgement in response to a seize
during an outgoing call. Range: 0-50-64000 msec.
Seize_ack_
t
imeout
Format: ca seize_ack_t d
Sets minimum delay (d) for the reception of a seize
acknowledgement signal during an incoming call.
Range: 0-2000-64000 msec.
Seize_delay Format:cased
Sets delay (d) before a seize condition is
recognized. Range: 0-50-10000 msec. Cycle voice
ports offline and back online to complete the update.
Start_delay Format:castp
Sets the period (p) after receipt of dial indication
before digit outpulsing occurs on an AVFAX card, an
E&M voice port, or DSUB card T-1/E-1 port. Range:
0-500-64000 msec. Cycle voice ports offline and
back online to complete the update.