Specifications

Command Summary 209
T
ranslation_rule
Delete
Format:catncd
Deletes a translation rule. Enter the command (ca t),
the rule number (n), and the case number (c)
followed by d (delete). Rule number: 0-3. Case
number: 0-99.
Translation_
rule
Modify
Format:catncmsmdmrsodo
Modifies or creates a translation rule. Enter the
command (ca t), the rule number (n), and the case
number (c) followed by m (modify).
Rule number: 0-3. Case number: 0-99. Then:
1. Enter number of Source Match rule (sm) (0 to
114)
2. Enter number of Destination Match rule (dm) (0
to 114)
3. Enter number of Route rule (r) (0 to 119)
4. Enter number of Source Output rule (so) (0 to 31)
5. Enter number of Destination Output rule (do) (0
to 31).
Warble
Format: ca warble s1_on s1_off s2_on s2_off f1 f2
l1 l2
Configures two signals that are used to generate
warble. Enter:
1. Signal 1 on-time (s1_on). Range: 0-100-32767
msec.
2. Signal 1 off-time (s1_off). Range: 0-100-32767
msec.
3. Signal 2 on-time (s2_on). Range: 0-100-32767
msec.
4. Signal 2 off-time (s2_off). Range: 0-100-32767
msec.
5. Signal 1 frequency (f1). Range: 0-1400-3000 Hz.
6. Signal 2 frequency (f2). Range: 0-2060-3000 Hz.
7. Signal 1 level (l1). Range: (-40)-(-16)-(-13) dB in
0.5-dB increments.
8. Signal 2 level (l2). Range: (-40)-(-16)-(-13) dB in
0.5-dB increments.
Cycle voice ports offline and back online.