Specifications

224 IBM Voice Over Frame Relay Perform Guide
Config Data_
ports
Format: sh c da dp d
Displays the configuration of data port dp. The
display (d) can be set to f (full) to display the
complete configuration, or c (current) to display only
the current configuration.
Config DLCI Format: sh c dl dp
Displays the configuration of DLCI dl on data port
dp.
Config DSUB Format:shcdsc
Displays DSUB card configuration (c).
Configuration: a (active configuration) or 1
(background configuration).
Config Hardware Format:shch
Lists circuit card assembly (CCA) positions in the
IBM 9783 unit and the CCA type, if one is present, in
each card position.
Config
Match_rules
Format:shcmfn
Displays the selected match rules from the IBM
9783 unit. Enter the command, the first match rule
(f) to display, and the number (n) of match rules to
display. First match rule: 0-114. Number of match
rules to display: 0-114.
Config
Output_Rules
Format:shcofn
Displays selected output rules from the IBM 9783
unit. Enter the command, the first output rule (f) to
display, and the number (n) of output rules to
display. First output rule: 0- 31. Number of output
rules to display: 1-31.
Config R2
Format
:shcr2
Displays the selected R2 parameters.
Config
Route_Rules
Format:shcrfn
Displays selected route rules from the IBM 9783
unit. Enter the command, the first route rule (f) to
display, and the number (n) of route rules to display.
First route rule: 0-119. Number of route rules to
display: 0-119.
Config
Sub_channels
Format: sh c s dp: dl
Displays subchannels assigned to DLCI dl on data
port dp.