Specifications

228 IBM Voice Over Frame Relay Perform Guide
Clear_evts
Format: u clear_e
Clears all events that are currently stored in the unit
event log. Use this command to simplify monitoring
of the event log by eliminating previous entries.
Clear_stat
Format: u clear_s card
Clears the last two parameters of SHOW
PERFORMANCE UNIT, System Memory Allocation
Failure and Internal Queue Failure for HSP card
designated by card (A–D). .
Date
Format: u d mm:dd:yy
Sets the IBM 9783 unit’s internal calendar. Specify
the date by entering two digits each for
month:day:year (i.e., 07:08:97). Colon (:), dash (-) or
slash (/) may be used as separators.
Frame_format
Format:ufformat
Sets the frame format type of the IBM 9783, as
specified by format. All IBM 9783s in a network must
have the same parameter specified: either
PROPRIETARY for a proprietary format, or FRF.11
for the Frame Relay Forum standard. Note: Use
FRF.11 when you will be sending Nuera proprietary
voice transmissions across non-Nuera
voice-over-frame-relay equipment.
Init
Format:ui
Resets all configuration parameters to their original
factory default settings.
Caution: Executing a Unit
Init interrupts the link, and necessitates
reconfiguration of the unit. Executing this command
on a remote site necessitates reconfiguration of the
remote unit either directly or by modem.
Map_node
Format: u m id dp: dl: sc
Defines data port dp, DLCI dl, and subDLCI sc,
which will carry a control processing (cp) channel
from an IBM 9783 unit to one or more other IBM
9783 units in a network. Node id (id):
network-unique identifier ranging from 1-254.
Reset
Format:ur
Executes self-test operations, executes a hardware
reset, and reinstates the most recent active and
stored configurations. The reset routine takes
approximately 5 min-utes to complete.
Caution:
Unit reset interrupts any communication in progress
.