Specifications

230 IBM Voice Over Frame Relay Perform Guide
Call_processing
Format:vvpcamr2
Sets the call processing mode (m) for voice port vp.
Mode: fo (force_connect), fxo, fxs, i (immediate), or
w (wink_start). Also sets R2 processing to ENABLE
or DISABLE.
Caution: Ensure that
Force_connected voice ports are set to the same
vocoder rate. Cycle voice port vp offline and back
online to complete the update.
CCS
Format:vvpccs
Enables and disables common channel signalling
(s) for voice port vp. This command is applicable
only with DVFAX voice cards. Signalling: d (disable),
i (invert), n (normal), or CLEAR_64K.
Clear_stat
Format:vvpcl
Resets high bit error rate (HBER) alarms and sync
loss counts for voice port vp.
DMW
Format:vvpdm
Controls a Digital Milliwatt standard-level (0 dBm),
1000-Hz tone which is applied to voice port vp
output (receive direction). DMW mode (m): e
(enable) or d (disable). Voice port vp must be offline.
Echo_canc
Format:vvpep1p2
Controls echo cancellation, echo cancellation
non-linear processing (NLP), and tone disable
features for voice port vp.
p1 p2
e (enable) - Default‘N/A
d (disable) N/A
n (NLP) e (enable) or d (disable).
t (Tone_disable) e (enable) or d (disable).