Specifications

Command Summary 231
Fa
x_III
Format: v vp fa p1 p2 rate tandem
Controls fax III operation and fax III nonstandard
facilities (NSF) operation for voice port vp.
p1 p2
e (enable) - Default N/A
d (disable) N/A
m(MAX_RATE)
n (NSF) e (enable) or d (disable)
This command also sets the maximum transmission
rate (rate) at 4800 or 9600. It sets the Compressed
Tandem feature to ENABLE or DISABLE. When this
feature is activated, recompression of voice is
prevented on the specified port.
Frame_packing
Format:vvpfrn
Configures the number (n) of voice frames from
voice port vp that will be packed into a single frame
relay packet. Number: 1-3-5.
Loopback
Format:vvplm
Controls loopback test mode (m) on voice port vp.
Loopback mode: s (subscriber), n(network) or d
(disable).
Modem_Support
Format: v vp r mo mode
Sets the voice port Modem Upspeed feature on the
voice port vp at a rate specified by r, which detects
the presence of a modem signal (V.32, V.32bis, or
V.34), bypasses the current vocoder, and starts
running a compression algorithm (or mocoder)
specifically designed for modems. Activate this
feature by specifying mode as TRANSPARENT;
disable it by specifying NONE. r can be 24, 30, 36,
or 42kbps.
Offline
Format:vvpof
Removes voice port vp from operation and places it
in offline mode.
Online
Format:vvpon
Places voice port vp into operation (online mode).