Specifications

Installation and Configuration Activities 29

The following procedure describes how to configure the data ports for frame relay

use.

1. Issue the following command. (In the following command line examples, A2

corresponds to data port A2. On your command line, replace A2 with the

designation for the data port you want to configure.)

DATA_PORTS A2 MODE FRAME_RELAY

2. Configure the clock mode for the data ports. The choices are:

• INTERNAL

• EXTERNAL

•SPLIT

For example, to select EXTERNAL clock mode for data port A2:

DATA_PORTS A2 CLOCK_MODE EXTERNAL

3. Configure data port rate. The following example configures data port A2 for a

data rate of 64000 bps:

DATA_PORTS A2 RATE 64000

Table 11 lists the available data rates.

Table 11. Data Rates (in bps) for the HSP Frame Relay/FRAD Ports

Create static connections

between subDLCIs or

DLCIs assigned to frame

relay ports

ch c Data port must be online

75 4000 12000 29867 84000 256000

150 4267 12800 32000 89600 268800

300 4667 14000 33600 96000 288000

600 4800 14400 36000 100800 336000

1200 5334 14934 37334 112000 384000

1334 5600 16000 38400 115200 403200

1600 6000 16800 42000 126000 448000

1867 6400 18000 44800 128000 504000

2000 7200 18667 48000 128000 504000

2134 7467 19200 50400 144000 576000

2400 8000 21334 56000 149334 672000

2667 8400 22400 57600 168000 806400

2800 9334 24000 64000 192000 1008000

3200 9600 25200 67200 201600 1344000

3600 10667 28000 72000 224000 2016000

3734 11200 28800 74667 252000

Task Command IBM 9783 Status