Specifications

Installation and Configuration Activities 31
3.3.3 FRAD Port Configuration
The following procedure describes how to configure the data ports for FRAD use.
1. Issue the following command. (In the following command line examples, A2
corresponds to data port A2. On your command line, replace A2 with the
designation for the data port you want to configure.)
DATA_PORTS A2 MODE FRAD
Task Command IBM 9783 Status
Place the FRAD data port
offline
da dp of
PlacedataportinFRAD
mode
da dp m frad Data port must be offline.
Existing DLCI must be
deleted if already assigned
Configure data port clock
mode
da dp clo Data port must be offline.
FRAD ASYNC mode does
not support data port clock
mode
Configure data port rate da dp r Data port must be offline
Configure data port
interface
da dp int Data port must be offline
Configure data port block
size
da dp b Data port must be offline
Configure data port
Invert_clock, if required
da dp inv Data port must be offline
Configure FRAD port mode frad dp m Data port must be offline
Configure FRAD port mode
configuration to
Async_config,
Bisync_config, or
HDLC_config
frad dp <a|bi|h> Data port must be offline
Configure FRAD port flow
control, if required
frad dp fl
Configure FRAD port
signalling
frad dp s Data port must be offline
Configure FRAD port OOS
signalling
frad dp o Data port must be offline
Configure FRAD port CIR frad dp c Data port must be offline
Configure FRAD port EIR frad dp e Data port must be offline
Configure FRAD port Tc frad dp tc Data port must be offline
Configure FRAD port
fragmentation
frad dp fr size Data port must be offline
Enable FRAD port traffic
shaping, if required
frad dp tr e Data port must be offline
Place FRAD port online da dp on
Create static connections
between subDLCIs,DLCIs,
FRAD ports, &
CP/accounting channels.
ch c Data port(s) must be
onlineDLCI must be
disabled