Specifications

46 IBM Voice Over Frame Relay Perform Guide
DIAL-MATCHING-RULE: Specifies a dial digit pattern-matching sequence in which
each element of the sequence specifies the range of acceptable digits at that
position..
NETWORK-OUTPUT-RULE: Specifies the destination number digits to be passed in the
frame relay call setup packed. The sequence is specified as a combination of the
dialed digits received on the originating telco port and constants.
TELCO-OUTPUT-RULE: Specifies the sequence of the dial digits to be sent out the
telco port when it is the destination of a call. The sequence is specified as a
combination of the destination and source number dial digits passed during call
setup, constant, and pulse characters.
SET Command
Use the SET command to specify the various delay and timeout values.
Voice Config> SET FR-NET
.... TIMER
.... TONE
FR-NET:
Specifies the number of the frame relay net over which VoFR (voice
frame) packets are to be routed. Specify any configured net number or 0xFFFF if
a net is not specified.
TIMER: Use the set timer command to set the following timer parameters.
Table 17. Setting the Timer Parameters
Parameter Description range (msec) default (msec)
answer-detect delay The time before an answer signal is
recognized
0-500 10
disconnect-detect-delay the time before a disconnect signal is
recognized
0-500 200
Voice Config>ADD DIALDIAL-MATCHING-RULE
Define Dial Digit Matching Rule #1
Dial Mask 1 : Digit String (0-9,A-D,*,#), [W]ildcard, [N]umeric Wildcard,
[M]ultiDigit Wildcard.
[MultiDigit Wildcard]? 1
Dial Mask 2 : Digit String (0-9,A-D,*,#), [W]ildcard, [N]umeric Wildcard,
[M]ultiDigit Wildcard, or [E]nd.
[End]? 2
Dial Mask 3 : Digit String (0-9,A-D,*,#), [W]ildcard, [N]umeric Wildcard,
[M]ultiDigit Wildcard, or [E]nd.
[End]? 01
Dial Mask 4 : Digit String (0-9,A-D,*,#), [W]ildcard, [N]umeric Wildcard,
[M]ultiDigit Wildcard, or [E]nd.
[End]? E
Voice Config>ADD NETWORK-OUTPUT-RULE
Define Network Output Rule #1
Digit 1 : (Destination/Constant/End) [Destination]? D
(1-20) [1]?1
Digit 2 : (Destination/Constant/End) [Destination]? D
(1-20) [2]? 2
Digit 3 : (Destination/Constant/End) [Destination]? D
(1-20) [3]? 3
Digit 4 : (Destination/Constant/End) [Destination]? E