Specifications

Sample Scenarios 77
2. To define the voice function:
Create a dial matching rule for any number between 100 and 199. Create a
network output rule to send the three digits that are dialed. Add a local call
processing rule for each voice port to use the dial matching rule and network
output rule we just created.
Config (only)>SET HOSTNAME 2212-A
Host name updated successfully
2212-A Config (only)>ADD DEVICE VOICE-FXS
1996 more interfaces may be configured.
Device Slot #(1-5) [1]?
Adding 2 Voice FXS devices in slot 1 as interfaces 4 - 5.
Use "net 4" - "net 5" to configure Voice FXS parameters.
Config (only)>NETWORK 4
2212-A Voice 4 Config>LIST
Node ID: 0.0.0.0
Local Phone Number: 0
Telco Output Rule Number: 0
Telco Parameters
Tx Gain : -4 dB
Rx Gain : -4 dB
OOS Signal : Busy
Dsp Parameters
Vocoder Suite : Nuera VAD Mode : Off
Vocoder Rate : 9600 bps VAD Hangover : 255 ms
Frame Packing : 1 VAD Threshold : -45 dB
Echo Cancel : On Fax : On
NLP : On NSF : On
2100Hz Detect : On
2212-A Voice 4 Config>SET LOCAL-NUMBER 101
Number of leading digits used for local call routing (1 to 3) [3]?
2212-A Voice 4 Config>SET VAD MODE ADAPTIVE
2212-A Voice 4 Config>EXIT
Config (only)>NETWORK 5
2212-A Voice 5 Config>SET LOCAL-NUMBER 102
Number of leading digits used for local call routing (1 to 3) [3]?
2212-A Voice 5 Config>SET VAD MODE ADAPTIVE
2212-A Voice 5 Config>EXIT
Config (only)>.