Specifications

88 IBM Voice Over Frame Relay Perform Guide
4.2.2.8 Sample Configuration Steps for 2212 B2
1. To configure frame relay:
This is a continuation of the configuration from previous scenario. First we will
configure the frame relay interface. Enable end-to-end fragmentation and CIR
monitor. Since we are in a back to back configuration we need to disable LMI.
Add a PVC.
2212-A Voice Config>ADD CALL-PROCESSING-RULE
Voice Net [0]? 4
Define Call Processing Rule #2
Destination Type (Local or Remote) [Remote]?
Call Processing DLCI (16 to 1007) [16]?
Payload DLCI (16 to 1007) [16]?
Call Processing Subchannel (4 to 254) [4]?
Payload Subchannel (4 to 254) [4]? 5
Dial Digit Matching Rule Number (0 to 3) [0]? 2
Network Output Rule Number (0 to 1) [0]? 1
2212-A Voice Config>ADD CALL-PROCESSING-RULE
Voice Net [0]? 4
Define Call Processing Rule #3
Destination Type (Local or Remote) [Remote]?
Call Processing DLCI (16 to 1007) [16]?
Payload DLCI (16 to 1007) [16]?
Call Processing Subchannel (4 to 254) [4]? 6
Payload Subchannel (4 to 254) [4]? 7
Dial Digit Matching Rule Number (0 to 3) [0]? 3
Network Output Rule Number (0 to 1) [0]? 1
2212-A Voice Config>ADD CALL-PROCESSING-RULE
Voice Net [0]? 5
Define Call Processing Rule #2
Destination Type (Local or Remote) [Remote]?
Call Processing DLCI (16 to 1007) [16]?
Payload DLCI (16 to 1007) [16]?
Call Processing Subchannel (4 to 254) [4]? 8
Payload Subchannel (4 to 254) [4]? 9
Dial Digit Matching Rule Number (0 to 3) [0]? 2
Network Output Rule Number (0 to 1) [0]? 1
2212-A Voice Config>ADD CALL-PROCESSING-RULE
Voice Net [0]? 5
Define Call Processing Rule #3
Destination Type (Local or Remote) [Remote]?
Call Processing DLCI (16 to 1007) [16]?
Payload DLCI (16 to 1007) [16]?
Call Processing Subchannel (4 to 254) [4]? 10
Payload Subchannel (4 to 254) [4]? 11
Dial Digit Matching Rule Number (0 to 3) [0]? 3
Network Output Rule Number (0 to 1) [0]? 1
2212-A Voice Config>EXIT
2212-A Config>