Installation guide

4 Ω BRIDGED
REM
CH2 CH1
CH4 CH3
POWER
SPEAKER
15 16
COMPONENT VALUES FOR
6dB PASSIVE CROSSOVER
FREQUENCY INDUCTOR CAPACITOR
80 Hz
100 Hz
120 Hz
150 Hz
7.5 mH
6.5 mH
5.5 mH
4 mH
470 uF
330 uF
330 uF
220 uF
4 CHANNEL WITH DUAL MIXED MONO CONFIGURATION
ALL CROSSOVER
SETTINGS IN THIS MODE
SHOULD BE SET TO
FULL RANGE.
SUBWOOFER
MINIMUM IMPEDANCE
8 OHMS
SUBWOOFER
MINIMUM IMPEDANCE
4-8 OHMS
FRONT SPEAKERS
REAR SPEAKERS
HIGH PASS
FILTER CAPACITORS
LOW PASS
FILTER INDUCTOR
LOW PASS
FILTER INDUCTOR
LEFT SPEAKER
4 OHM
LEFT SPEAKER
4 OHM
RIGHT SPEAKER
4 OHM
RIGHT SPEAKER
4 OHM
4 Ω BRIDGED
REM
CH2 CH1
CH4 CH3
POWER
SPEAKER
CH 1-2
CROSSOVER MODE SWITCH
IN HIGH PASS POSITION
CH 3-4
CROSSOVER MODE SWITCH
IN LOW PASS POSITION
SUBWOOFER
MINIMUM IMPEDANCE
4 OHMS
SUBWOOFER
MINIMUM IMPEDANCE
8 OHMS
FRONT SPEAKERS
LOW PASS
FILTER INDUCTOR
LEFT SPEAKER
4 OHM
RIGHT SPEAKER
4 OHM
COMPONENT VALUES FOR
6dB PASSIVE CROSSOVER
FREQUENCY INDUCTOR CAPACITOR
80 Hz
100 Hz
120 Hz
150 Hz
7.5 mH
6.5 mH
5.5 mH
4 mH
470 uF
330 uF
330 uF
220 uF
CH3-CH4
GAIN
CH1-CH2
GAIN
0.2V7V
0.2V7V
CH3-CH4
CLONE FR/HP
LP/BP FR/HP
BASS
REMOTE
REMOTE SUBWOOFER
LEVEL CONTROL
(optional, see dealer for details)
4 CHANNEL AMPLIFIER IN 3 CHANNEL MODE