Spec sheet

Ca
36" Built-In Touch Control
Induction Cooktop
CHP95362MSS
To insure accuracy, it is best to make a
template when cutting the opening in the counter
Electrical junction box 16" MIN.
below countertop
Cooktop
36"
20-7/8"
18-7/8"
33-3/4"
19-1/8" to
19-1/4"
33-7/8"
to 34"
CHP9536SJ
2-1/2" MIN.
Required
1-3/4" MIN.
to rear wall
4-5/8" at baffle near center
ofunit (except when installed
above an approved wall
oven) and 3-1/4" at rear
of air intake
13" MAX. depth of unprotected
overhead cabinets (when no
hood or microwave is installed)
30" MIN. from countertop to
unprotected cabinet (when
no hood or microwave is
installed)
2" MIN. clearance
to side wall from cut-out
on both sides of cooktop
15" MIN. height from countertop
to nearest cabinet (including
light rails) on both sides of
cooktop
See label next
to nameplate for
MIN. clearance
to wall
To insure accuracy, it is best to make a
template when cutting the opening in the counter
Electrical junction box 16" MIN.
below countertop
Cooktop
36"
20-7/8"
18-7/8"
33-3/4"
19-1/8" to
19-1/4"
33-7/8"
to 34"
CHP9536SJ
2-1/2" MIN.
Required
1-3/4" MIN.
to rear wall
4-5/8" at baffle near center
ofunit (except when installed
above an approved wall
oven) and 3-1/4" at rear
of air intake
13" MAX. depth of unprotected
overhead cabinets (when no
hood or microwave is installed)
30" MIN. from countertop to
unprotected cabinet (when
no hood or microwave is
installed)
2" MIN. clearance
to side wall from cut-out
on both sides of cooktop
15" MIN. height from countertop
to nearest cabinet (including
light rails) on both sides of
cooktop
See label next
to nameplate for
MIN. clearance
to wall
© 2018 GE Appliances PC90238 07/18
For answers to your Café™ product questions, visit our website at cafeappliances.com.
WARRANTY
Parts warranty Limited 1-year entire appliance
Labor warranty Limited 1-year entire appliance
Note: Check local codes for required breaker size.
Approximate Cooking Dimensions
2-1/2" MIN
From front edge
of countertop to front
edge of cooktop cutout
31-1/4" MIN
From top surface
of countertop to
top surface of
wall oven support
platform
INSTALLATION ABOVE A WALL OVEN
Installation above a wall oven
DIMENSIONS AND INSTALLATION
Important: Requires a 3" free area between the bottom of the cooktop to
any combustible material, i.e., shelving. Free area not required when installing
wall oven underneath cooktop. Refer to installation instructions. Requires a
15" minimum from cooktop to adjacent overhead cabinets. Units are furnished
with a 48" flexible armored cable.
Note: 36" induction cooktops are approved for use over select GE 30" Single
Wall Ovens and Warming Drawers. Refer to cooktop and wall oven/warming
drawer installation instructions packed with product for current dimensional
data. If installed with a GE Telescopic Downdraft System, consult both the
cooktop and downdraft installation instructions packed with product before
installing. Cooktop gas/electric supply may need to be re-routed to install
downdraft. The countertop cutout requires 23-1/2" minimum flat countertop
surface and 25" minimum total countertop depth. In addition, other clearances
to front edge of the countertop must be considered.
Before installing, consult installation instructions packed with product
for current dimensional data.
KW RATING
240V 11.1
208V 9.6
AMPERAGE
240V 50 Amps†
208V 50 Amps†