Installation Guide

FOR WARRANTY ISSUES OR QUESTIONS, CONTACT CAHABA AT (866) 837-2550.
©2017 CAHABA. ALL RIGHTS RESERVED.
1
PULL-OUT KITCHEN FAUCET
Installation & Care Instructions
BEFORE YOU START
Make sure you have all necessary parts by checking the diagram and parts list.
If any part is missing or damaged, please contact Cahaba Customer Service at
(866) 837-2550 for a replacement.
Turn off the hot and cold water supply at the angle stops and turn on the old
faucet to release any built up pressure. Remove existing faucet. Clean sink or
countertop to remove any debris, plumber’s putty, or silicone.
Place bucket under angle stops. Turn on to flush any debris prior to installing
new plumbing. Shut off angle stops.
Pre-drilled hole size requirement: 1-3/8”
This faucet is rated for normal residential use only.
RECOMMENDED TOOLS
Adjustable wrench
Pipe wrench
Safety glasses
Bucket
Screwdriver
Plumbing tape
Towels
Silicone sealant
FOR MODEL NUMBER
CA6110SS CA6110CP
1 Spray head & hose
2 Index
3 Set screw
4 Handle
5 Cap
6 Screw
7 Bonnet
8 Cartridge & Screw
9 Plastic washer
10 Metal washer
11 Nut
12 Screw
13 Escutcheon
14 Base plate
15 Bolt
16 Nut
17 Block
18 O-ring
19 Quick connect assembly
20 O-ring
21 Weights
22 Pump nut
23 Bottle
24 Soap dispenser
FAUCET PARTS

Summary of content (5 pages)