Use and Care Manual
P4, P5, and P6 Barbecue Grills
LTR50001137, Rev. K
Appendix
www.calamebbq.com
31
All Cal Flame grills are manufactured as standard liquid propane (LP) grills and can be converted to burn natural
gas (NG). However, Cal Flame P4, P5, and P6 grills do not include a conversion kit and it must be ordered
separately. You can nd ordering information on page 37.
There are two steps required to convert a grill from LP to NG.
You must perform both steps.
Step 1: Switching the regulator behind the grill
Step 2: Changing the burner orices
The conversion kit provided with your grill may include some or
all of the parts shown at right, depending on the size and model
of your grill.
The kit contains orices to convert main burners, rear infrared
burners, and the large infrared burner. Your kit will have only the
parts you need to convert your grill.
Before you begin, make certain the LP gas source has been
disconnected from the grill.
To gain access to the NG regulator, tilt the grill forward.
You will need:
• Pipe wrench
• Regulator
• Pipe compound suitable
for natural gas
Converting from LP to NG
WARNING! You must have an authorized service technician perform this procedure.
If these instructions are not followed exactly, a re or explosion may result causing
property damage, personal injury or loss of life. Lloyd’s Material Supply (LMS) will not
be held responsible for an improperly converted gas grill.
1. Remove the LP gas line and LP gas tting from end of manifold.
2. Attach NG regulator to end of manifold.
Step 1: Attaching the regulator behind the grill