Repair manual

47957
71716
Figure 60
Figure 61
MAIN DATA OF THE BUSHING, CONNECTING ROD, PIN AND BEARING SHELLS
* Measurement to be made after driving in the bushing.
Connecting rod punch markings
Letter indicating t he class of w eight:
A = 4661 to 4694 g.
B = 4695 to 4728 g.
C = 4729 to 4762 g.
Number indicating the selection of the diameter
of the big end bearing seat:
1 = 94.000 to 94.010 mm
2 = 94.011 to 94.020 mm
3 = 94.021 to 94.030 mm
Number indicating the selection of diameter
for the big end bearing housing:
1
2
3
Punched on the big end of the connectin g rod are the data
relating to the section in classes relating to the connecting
rodseatsandtheweights.
On assembling the connecting rods, check
theyareallofthesameclassofweight.
VIEW FROM “A”
54.000
54.030
54.085
54.110
50.019*
50.035*
49.994
50.000
1.970
2.000
87.000
87.030
Connecting rod
NOTE
SECTION 4 - OVERHAUL AND TECHNICAL SPECIFICATIONS
31
F3C CURSOR ENGINES
Print P2D32C005 E Base - May 2007