Repair manual

60621
- Using the tool 99390772 (2) remove any residues (1) left
in the groove of th e cylinder head.
- Screw the extractor 99342149 (2) into the case (3).
Screw down the nut (1) and take the case out of the
cylinder head.
60620
60622
- Lubricate the seals (3) and fit them on the c ase (4). Using
tool 99365056 (2) secured to the cylinder head with
bracket A,driveinthenewcase,screwingdownthe
screw (1) upsetting the bottom portion of the case.
60623
- Using the reamer 99394041 (1-2), rebore th e hole in the
case (3).
Figure 77
Figure 78
Figure 79
Figure 80
Assembly
SECTION 4 - OVERHAUL AND TECHNICAL SPECIFICATIONS
37
F3C CURSOR ENGINES
Print P2D32C005 E Base - May 2007