Repair manual

SECTION 4 - OVERHAUL AND TECHNICAL SPECIFICATIONS
47
F3C CURSOR ENGINES
Print P2D32C005 E Base - May 2007
P
A
R
T
TORQUE
P
A
R
T
Nm kgm
Screw fixing alternator M 10x1,5 I = 35 mm
M 10x1,5 I = 60 mm
30 ± 3
44 ± 4
(3 ± 0.3)
(4.4 ± 0.4)
Screws fixing air- conditioner c ompressor to mount 24.5 ± 2.5 (2.5 ± 0.25)
Screws fixing guard 24.5 ± 25 (2.5 ± 0.25)
Filter clogging sensor fasten in g 55 ± 5 (5.5 ± 0.5)
Water/fuel temperature sensor fastener 35 (3.5)
Thermometric switch/transmitter fastener 25 (2.5)
Air temperature transmitter fastener 35 (3.5)
Pulse transmitter fastener 8 ± 2 (0.8 ± 0.2)
Injector-pump connections fastener 1.36 ± 1.92 (0.13 ± 0.19)
Turbocompound Unit
Intermediate gear support shaft fixing screws M12x30 115 (11.5)
Intermediate gear fixing screw M12x80 115 (11.5)
Screw t hat fixes the hydraulic joint to the flywheel box M10x70
M10x110
M10x150
45
45
45
(4.5)
(4.5)
(4.5)
Oil return pipe to block fixing screws M8x70x1.25 23 (2.3)
Oil delivery pipe to hydraulic joint threaded fittings 55 (5.5)
Screws that fix the power turbine to hydraulic joint M10x50 40 (4.0)
Screws that fix the turbine to the exhaust manifold 70 (7.0)
Nuts that fix the turbine to the exhaust manifold 45 (4.5)
Clamps that fix the manifold to the turbines 8.5 (0.85)
♦ Before assembly, lubricate with UTDM oil
• Before assembly, lubricate with graphitized oil