Repair manual

Figure 11
Figure 12
Only for F3CE0684A*E001 engine
Using a suitable tool (3), work in the direction of the arrow on
the tightener (2) and remove the belt (1).
104249
Loosen and remove the screws (3) and (4) fastening the
alternator (1) to the supporting brackets (2) and (5).
Remove the supporting brackets (2) and (5) from the
crankcase.
119478
Figure 13
104251
Remove:
- thermostat assembly (8);
- pipes complete with coolant (6);
- pulley (4);
- water pump (7);
- automatic tightener support (1);
- fixed tightener (5);
- damper flywheel (3) and pulley beneath;
- automatic tightener (2);
Figure 14
119487
Remove the oil pressure adjustment valve (1).
Loosen and remove the screw (2) fastening the hydraulic
coupling to the flywheel casing.
8
SECTION 3 - INDUSTRIAL APPLICATION
F3C CURSOR ENGINES
Base - May 2007 Print P2D32C005 E