Repair manual

Figure 15
Figure 16
Removetheenginesupports;
Remove the drive (1).
104247
104248
Secure the engine to the rotary stand with the brackets (1).
Drain the lubricating oil from the sump.
Figure 17
119480
Figure 18
With the extractor 99340053 (2) applied as shown in the
figure, extract the seal (4). Undo the screws (3) and take off
the cover (1).
99361
Remove:
- the starter motor (1);
- the control uni t (2) and its support;
- the oil dipstick (3) from the crankcase.
SECTION 3 - INDUSTRIAL APPLICATION 9
F3C CURSOR ENGINES
Print P2D32C005 E Base - May 2007