Repair manual

Figure 19
Figure 20
Figure 21
119483
119484
Loosen and remove the screws (1) fastening the exhaust
manifold (3) to the crankcase.
Remove the shims (2 ).
Detach the exhaust manifold (2) from the crankcase and
recover the seals.
119485
On exhaust side of the engine:
- loosen the clamps (1 and 2);
- remove the connection manifold (3) between
turbocharger and power turbine.
In order to remove the turbocharger (2):
- remove the screws ( 1) and recover the shims (3);
- remove the two nuts (5);
Recover the seal (4) after removing the turbocharger (2)
In order to remove the oil delivery pipe ( 1) from the
turbocharger:
- loosen the fitting (2) on the oil filter assembly;
- loosen and remove the turbocharger fastening screws (6).
Remove the oil return tube (4) from the turbocharger:
- - loosen the screws (3 and 5) fastening the pipe to the
crankcase and to the turbocharger itself.
Figure 22
119481
10
SECTION 3 - INDUSTRIAL APPLICATION
F3C CURSOR ENGINES
Base - May 2007 Print P2D32C005 E