Repair manual

119491
Figure 27
Figure 28
Figure 29
Figure 30
Figure 31
60497
- Unscrew the screws (1); tighten one screw in a reaction
hole and r emove the shoulder plate (2), remove the sheet
gasket.
60496
- Unscrew the screws (2) and remove the gear (1) fitted
with phonic wheel.
85480
Remove the rocker arm cover (1), take off the screws (2) and
remove: the cover (3), the filter (5) and the gaskets (4 and 6).
Take off the screws (8) and remove the blow-by case (7).
Loosen the screws (1) and remove the intake manifold (2)
from the engine.
104783
The air intake joint (3) may have different positions
depending on the type of engine.
NOTE
Remove the plate (1) and remove traces of sealant from the
part in contact with the flywheel casing.
12
SECTION 3 - INDUSTRIAL APPLICATION
F3C CURSOR ENGINES
Base - May 2007 Print P2D32C005 E