Repair manual

Figure 32
119493
Figure 33
Figure 34
Figure 35
Figure 36
Loosen and r emove the screws (1).
Remove the intermediate gear support shaft. .
Figure 37
In sequence, take out the:
- idle gear (1);
- oil pump gear ( 2 )
- transmission gear (3);.
119492
60501
Unscrew the screws (1) and take down the gearbox (2).
60500
Apply the extractor 99340054 (2) and pull out the seal
gasket (1) .
60499
Stop the engine flywheel (3) rotation by means of tool
99360351 (1), unscrew the fixing screws (2) and remove the
engine flywheel (3).
60498
Unscrew the screws (2) and remove the transmission gear (1).
SECTION 3 - INDUSTRIAL APPLICATION 13
F3C CURSOR ENGINES
Print P2D32C005 E Base - May 2007