Repair manual

104283
DETAIL OF PUNCH MARKS ON ENGINE FLYWHEEL FOR PISTON POSITIONS
C = Hole on flywheel with one reference mark,
corresponding to the TDC of pistons 2-5.
D = Hole on flywheel with two reference marks, position
corresponding to 54°.
A = Hole on flywheel with one reference mark,
corresponding to the TDC of pistons 3-4.
B = Hole on flywheel with one r eference mark,
corresponding to the TDC of pistons 1-6.
VIEW OF HOLES:
A—B—C
VIEW OF
HOLE: D
ENGINE FLYWHEEL
Fitting engine flywheel (For F3CE0684B*E003 engines)
b
d
c
a
Fitting engine flywheel (For F3CE0684A*E001 engines)
119482
DETAIL OF PUNCH MARKS ON ENGINE FLYWHEEL FOR PISTON POSITIONS
C = Hole on flywheel with one reference mark,
corresponding to the TDC of pistons 2-5.
D = Hole on flywheel with two reference marks, position
corresponding to 54°.
A = Hole on flywheel with one reference mark,
corresponding to the TDC of pistons 3-4.
B = Hole on flywheel with one r eference mark,
corresponding to the TDC of pistons 1-6.
Figure 62
Figure 63
SECTION 3 - INDUSTRIAL APPLICATION 19
F3C CURSOR ENGINES
Print P2D32C005 E Base - May 2007