Repair manual

ENGINE COMPLETION
Arrange the seal (4) on the oil sump (1), arrange the shim (2),
fit the sump on the crankcase and tighten the screws (3) at the
specified torque.
Figure 87
Figure 88
101606
DIAGRAM OF ENGINE OIL SUMP FIXING SCREWS
TIGHTENING SEQUENCE
101607
Figure 89
Fit the suction rose (1) and tighten the fastening screws at the
specified torque.
104784
Figure 90
Only for engine F3CE0684A*E001
Only for engine F3CE0684B*E003
Arrange the seal (4) on the oil sump (1), arrange the shim (2),
fit the sump on the crankcase and tighten the screws (3) at the
specified torque.
119500
Figure 91
116817
Fast en the intake manifold (1) and tighten the screws (2) at the
specified torque.
The inlet fitting may have different positions
according to the engine type.
NOTE
SECTION 3 - INDUSTRIAL APPLICATION 27
F3C CURSOR ENGINES
Print P2D32C005 E Base - May 2007