Repair manual

Figure 96
Fit the exhaust manifold.
Figure 97
119485
Remove the seals between the exhaust manifold
and the crankcase
NOTE
119489
Fit the oil return pipe (1).
Fasten the screws (2) fastening the pipe (1) to the crankcase.
Tighten the screws (2) at a torque of 23 Nm.
119488
Fit the oil delivery pipe (2) to the hydraulic coupling fastening
it with fittings (1) and (3).
Figure 98
Figure 99
119486
Fit the power turbine (2) onto the hydraulic coupling.
Lubricate the accommodation seat on the hydraulic
coupling with Loctite AS600 before fitting the
power turbine.
When fitting the power turbine on the hydraulic coupling, pay
attention to the meshing of the gears which transmit motion
from one element to the other.
Tighten the fastening screws (1).
Tighten the screws (1) at a torque of 40 Nm.
NOTE
Insert the seals (2) between the fastening screws (1) and the
intake manifold.
SECTION 3 - INDUSTRIAL APPLICATION 29
F3C CURSOR ENGINES
Print P2D32C005 E Base - May 2007