Repair manual

Figure 104
Figure 105
Fit, with the following parts:
- automatic tightener support (1);
- automatic tightener (2);
- damper flywheel (3) and pulley beneath;
- fi xed tightener (5);
- water pump (7);
- the pulley (4);
- pipe comprehensive of coolant (6);
- thermostat assembly (8).
Figure 106
Mount the following, tightening the screws to the prescribed
torque:
- the supports (1 and 3);
- alternator (2).
Using a suitable tool (3), work in the direction of the arrow on
the tightener (2) and mount the belt (1).
The tighteners are automatic, so there are no other
adjustments after assembly.
99360
104251
104249
Figure 107
Only for engine: F3CE0684A*E001
NOTE
- driving belt.
To mount belt (1), belt tensioner (2) has to be operated by
proper tooling (3) according to the direction indicated by the
arrow in Figure.
106223
Only for engine: F3CE0684B*E003
SECTION 3 - INDUSTRIAL APPLICATION 31
F3C CURSOR ENGINES
Print P2D32C005 E Base - May 2007