Repair manual

Figure 108
Figure 109
Figure 110
Fit the arm 99360585 onto the engine lifting hooks and hook
the arm onto the hoist.
Take out the screws fixing the brackets 99361036 to the
rotary stand. Lift the engine and remove the above-mentioned
brackets from it.
Complete engine assembly with the following parts, tightening
the fixing screws or nuts to the prescribed torque:
- mount the drive (1);
- mount the engine supports;
Mount the oil pressure adjuster valve (1).
Fasten and tighten the screw (2) fastening the hydraulic
coupling to the flywheel casing.
104247
119487
104782
For all types
Only for F3CE0684B*E003
Assemble the following components and tighten their fixtures
to the specified torque:
- the fixed belt tightening roller (1);
- the support (2);
- the automatic belt tightener (3 );
- the damping flywheel (4) and the pulley beneath it;
- all the coolant pipes (5);
- the water pump (6);
- the fixed belt tightening roller (7);
- the thermostat assembly (8).
32
SECTION 3 - INDUSTRIAL APPLICATION
F3C CURSOR ENGINES
Base - May 2007 Print P2D32C005 E