Repair manual

Figure 111
Assemble the alternator support (3) on the engine and tighten
the locking screws to the specified torque.
Assemble the alternator (4) and tighten the locking screws to
the specified torque value.
Assemble the compressor (1) complete with its support (2)
on the engine and tighten the locking screws to the specified
torque.
104780
Assemble the belt on the pulleys and tightening rollers, making
sure that it is correctly inserted in its seats.
The belt tighteners are of the automatic type and so
no further adjustment is required after assembly.
!
Figure 112
104781
SECTION 3 - INDUSTRIAL APPLICATION 33
F3C CURSOR ENGINES
Print P2D32C005 E Base - May 2007