PRG8510E-B.
Table of Contents Key Definitions................................................. 3 Basic Function Keys...................................... 3 Dimensional Unit Keys.................................. 3 Convert Key Functions.................................. 4 Memory......................................................... 5 Entering Square or Cubic.............................. 6 Fractional Resolution.................................... 6 Project Keys..................................................
.......... 3 .......... 3 .......... 3 .......... 4 .......... 5 .......... 6 .......... 6 .......... 6 .......... 8 .......... 8 .......... 8 .......... 9 ........ 10 ........ 10 ........ 10 .........11 .........11 ........ 12 ........ 12 ........ 12 ........ 13 ........ 13 ........ 13 ........ 13 ........ 14 ........ 14 ........ 15 ........ 15 ........ 16 ........ 16 ........ 17 ........ 18 ........ 18 Key Definitions Basic Function Keys o On/Clear Key ─ turns power on.
(cont'd) Ç÷ i Inch Key ─ enters or converts to Inches. Entry can be whole or decimal number. Also used with the / key for entering Fractional Inch values (for example, 9 i 1 / 2). Repeated presses during conversions toggle between Fractional and Decimal Inches. / Fraction Bar Key ─ used to enter fractions. Fractions can be entered as proper (1/2, 1/8, 1/16) or improper (3/2, 9/8). m Meter Key ─ enters or converts to Meters. Çx Ç% Memo Ç+ Ç– Ç+ Convert Key Functions Ç Ç– PRG8510E-B.
to decimal key for (for eated gle al Ç÷ Square Root (√x̄ ) ─ finds Square Root of value in display. Çx Value Squared (x2) ─ finds Square of value in display. Memory Ç+ M+ ─ adds or stores a value in the semi-permanent Memory (for example, 1 5 0 Ç +). Semi-permanent means the value is cleared when the calculator is turned off. Ç– Ç+ M- ─ subtracts a value from the semi-permanent Memory (for example, 1 5 0 Ç – Ç + subtracts 150 from the Memory).
Entering Square or Cubic To label a dimension as “Square” or “Cubic,” enter the value, then press the desired dimension key twice for Square and three times for Cubic. For example, to enter 25 Cubic Yards, press 2 5 y y y. t Fractional Resolution Your calculator is set to display Fractional values to the nearest 16th of an Inch (default setting). Press Ç / to access the Fractional Resolution setting. Repeated presses of / then revolve through the available settings: 1/16, 1/32, 1/64, 1/2, 1/4, and 1/8.
t he are ple, to yy Note: Tile sizes are shown in Inches, not Square Inches. In other words, a 6″ tile is really 6″ x 6″, or a 36 Square-Inch tile, but it is labeled as a 6″ size. ional cess peated he /2, 1/4, f paint, ulated ns, ed mber of an Tile ─ finds the number of tiles, based on an entered or calculated area. Repeated presses scroll between numbers of tiles for various standard tile sizes (18″, 16″, 13″, 12″, 10″, 8″, 6″, 4″, 2″, 1″, and 24″).
Basic Dimensional Math Linear Conversions Conver Convert 15 Feet 9-1/16 Inches to other units of measure. o 25f Çy Keystroke Keystr Display o 0. 15f9i1/16 15 feet 9-1/16 inch Çf 15.75521 feet Çi 189.0625 inch Çy 5.251736 yd Çm 4.802187 m Convert 14.793 Decimal Inches to Fractional Inches. Keystroke o 14•793i Çi Display 14.793 14-13/16 0. inch inch Square and Cubic Conversions Convert 25 Square Feet to other Square dimensions. Keystroke o 25ff Çy Çm PRG8510E-B.indd 8 Display 0. 25.
Convert 25 Cubic Feet to Cubic Yards. Keystroke her Display 0. /16 inch 21 feet 625 inch 1736 yd 02187 m actional Display 793 /16 0. inch inch s uare Display 0. sq feet o 25fff Çy Display 0. 25. cu feet 0.925926 cu yd Basic Dimensional Math Keystroke Display 0. o Adding Dimensions: 10i+2f 5i= Subtracting Dimensions: 5f– 1i3/4= 4 3 feet 3 inch 10-1/4 inch feet Dividing Dimensions: 10f÷ 1i1/4= 96. Multiplying Dimensions/Waste Factor Allowance: 150ff+ 10% 165.
(cont'd) Keystroke Finding Volume/Cubic Feet: 5fx1•5 fx2i= Display 1.25 cu feet Paint: Gallons, Quarts, or Pints How many Quarts of paint do you need to cover a wall measuring 12′ x 8′? How many Pints? How many Gallons? o 12fx8f= p p p How ma measur tiles in v allowan Note: Af until you ProjectC Project Examples — Using Default Values Keystroke Tiles: Display 96. 0. sq feet 1.10 2.19 0.
Display cu feet Tiles: Quantity How many tiles do you need to cover a floor measuring 10′ x 15′? Find the number of tiles in various sizes. Also, add a 10% waste allowance, in case you need extra tile. Note: After converting to Tile, press the t key until you reach the desired tile size. The Home ProjectCalc lists 11 of the most popular tile sizes. s ed to w many Display 0. sq feet 1.10 2.19 0.27 qt pt gl Keystroke Display o 0. 10fx15f= 150. sq feet +10% 165. sq feet t 73.33 tile (18 in) t 92.
(cont'd) Keystroke c c c c Display 10.42 9.62 8.33 13.89 sq yd (12 ft roll) feet (13 ft roll) feet (15 ft roll) feet Concrete: Bags o 9fx15f x4i= C After 8 Display 0. 45. cu feet 67.50 bag Finding the Cost of Materials Cost of Concrete How much does 216 Cubic Feet of concrete cost, if the Cost Per Cubic Yard is quoted at $50? Keystroke o 216fff Çy x 5 0 Ç • (Cost) If your c press R the C paper c Auto S Find the number of bags of concrete for a patio measuring 9′ x 15′ x 4″.
isplay 9 sq yd ft roll) ft roll) ft roll) If your calculator should ever “lock up,” press Reset — a small hole located above the C key/upper right. Use the end of a paper clip to press the button. Auto Shut-Off for a After 8 to 12 minutes of non-use. Display 0. cu feet .50 Auto Shut-Off and Battery Reset bag ond is Display 0. cu feet 8. cu yd 400.00 Battery Battery Included: One CR-1620 battery. Battery Life: 575 hours of actual use.
Repair and Return Repair and Return Information Return Guidelines: 1. Please read the Warranty in this User’s Guide to determine if your Calculated Industries product remains under warranty before calling or returning any device for evaluation or repairs. 2. If your product won’t turn on, check the battery as outlined in the User’s Guide. 3. If you need more assistance, please go to the following Web site: www.calculated.com/warranty. 4.
n is ur emains or tion or heck ser’s ease n your ed en the m. mation 900 Warranty Warranty Repair Service: U.S.A. Calculated Industries (CI) warrants this product against defects in materials and workmanship for a period of one (1) year from the date of original consumer purchase in the U.S. If a defect exists during the warranty period, CI, at its discretion, will either repair (using new or remanufactured parts) or replace (with a new or remanufactured unit) the product at no charge.
(cont'd) Discla To obtain warranty service in the U.S., please visit www.calculated.com/warranty. CI MAK REPRE OR IMP PRODU MERCH PARTIC THIS P LIMITE PROCE ACCUR MATER THE PU RISK A PERFO A repaired or replacement product assumes the remaining warranty of the original product or 90 days, whichever is longer. Non-Warranty Repair Service: U.S.A. Non-warranty repair covers service beyond the warranty period or service requested due to damage resulting from misuse or abuse.
S., ranty. he er is eyond sted e or to tion ed for 5 900 S.A. epair the ch you act CI mation uties. Disclaimer CI MAKES NO WARRANTY OR REPRESENTATION, EITHER EXPRESS OR IMPLIED, WITH RESPECT TO THE PRODUCT’S QUALITY, PERFORMANCE, MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE.
(cont'd) Some states do not allow the exclusion or limitation of implied warranties or liability for incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific rights, and you may also have other rights, which vary from state to state. FCC Class B This equipment has been certified to comply with the limits for a Class B computing device, pursuant to Subpart J of Part 15 of FCC rules.
on or bility for , so y not u ve state. art J ulators Software copyrighted and licensed to Calculated Industries, by Construction Master Technologies, LLC, 2011. Pocket Reference Guide copyrighted by Calculated Industries, 2011. ProjectCalc® and Calculated Industries® are registered trademarks of Calculated Industries, Inc. s in se visit ated. about ucts, m PRG8510E-B.indd 19 ALL RIGHTS RESERVED Designed in the U.S.A. U.S.
PRG8510E-B.