Operation Manual

EN - 12
Tuner Operation
Band
Press [ / ] to power on, then press SRC
repeatedly to select tuner.
Touch [
] on the TFT or press [ BAND ] on
remote control repeatedly to select FM1 ->
FM2 -> FM3 -> AM1 -> AM2
Display shows wave band on the top left, and
preset stations on the middle.
Tune
Radio tune manually: Press [ / ] more
than 2 seconds, then press briefly to select
desired station.
Radio seek automatically: Press [ / ]
briey.
AMS: Auto Memory Store
Touch [ ] on the TFT, scan the preset
stations. Hold it more than 2 seconds,
the 6 strongest available stations will be
automatically saved in the memory of preset 1
- 6. Recall the preset station by touch it.
RDS (Radio Data System)
RDS service availability varies with areas.
Please understand if RDS service is not
available in you area, the following service is
not available.
RDS Basics
AF (Alternative Frequency): When the radio
signal strength is poor, enabling the AF
function will allow the unit to automatically
search another station with the same PI
(program identication) as the current station
but with stronger signal strength.
PS (Program Service name): The name of
station will be display instead of frequency.
AF Mode
Press the knob more than 2 seconds to enter
SETTING mode - TUNER menu - AF: ON/
OFF
AF On: AF function is activated.
AF Off: AF function is disabled.
Remark: AF indicator on LCD will flash until
RDS information is received. If RDS service
is not available in your area, turn off the AF
mode.
REG Mode
Enter SETTING mode - Radio menu - REG:
On/Off.
REG On: AF function will implement the
regional code (of the PI) and only stations in
the current region can be tuned automatically.
REG Off: AF function will ignore the regional
code (of the PI) and stations in the other
regions can also be tuned automatically.
Trafc Announcements
Some RDS FM stations periodically provide
trafc information.
TP (Trafc Program Identication)
Broadcasting of trafc information
TA (Trafc Announcements Identication)
Radio announcements on trafc conditions
TA Mode
Enter SETTING mode - Radio menu - TA: On/
Off.
When TA mode is turned on, the TA indicator
will blink.
When trafc announcement is received, the TA
indicator will display. The unit will temporarily
switch to the tuner mode (regardless of the
current mode) and begin broadcasting the
announcement at TA volume level. After the
traffic announcement is over, it will return to
the previous mode and volume level. When
TA is turned on, SEEK, SCAN, AMS function
can only be received or saved when traffic
program identication (TP) code is received.
EON (Enhanced Other Networks)
Whe n EO N da ta i s re ce ive d, t he EON
indicator lights and the TA and AF functions
are enhanced.
TA: Traffic information can be received from
the current station or stations in other network.
AF: The frequency list of preset RDS stations
is updated by EON data. EON enables the
radio to make fuller use of RDS information.
It constantly updates the AF list of preset
stations, including the one that currently tuned
into. If you preset a station around the area at
your home, you will later be able to receive the
same station at an alternative frequency, or
any other station serving the same program,
EON also keeps track of locally available TP
stations for quick reception.