Operation Manual

EN - 14
Bluetooth Operation
Pairing
Use this function to establish a connection
between the unit and your mobile phone.
• Long press the [SRC] button on the panel
or top left of the screen to enter source
menu.
• Touch [SET] button on the screen to enter
the unit system setting menu.
• Touch [ ] button on the screen to enter
Set/BT menu, sometimes you should press
[ ] rst.
• Switch the “Pair: On/Off” options to “On”.
Press top left of screen to return to BT menu.
Turn on Bluetooth function of your mobile
phone, keep phone within 3 meters to the unit
and start to search for Bluetooth devices.
After the name of the Bluetooth module
“CALIBER” appears on the pairing list on
your mobile phone, you should select it. At
this time, a pairing code is required. Enter
the pairing code (“1234” by default) and the
Bluetooth pairing will process automatically.
Some mobile phones may instruct you to
select connect or disconnect, please select
connecting.
Stop Pairing
You can stop pairing in following two ways:
1. Enter BT Menu, switch the “Pair: On/Off”
options to “Off”.
2. Long touch [ ] to cancel pairing,
“Connect Failed” will appears on the
screen.
Exit Phone Connecting
After pairing successful, if you want to
disconnect, long touch [ ] to cancel the
connecting of the mobile phone and the unit.
After disconnecting, “Exit Pair” will appear son
the screen.
Also you can dis-connect or re-connect on
the Pairlist. First touch [
] on the BT menu.
Select a phone name connected before, then
touch [
] to dis-connect or touch [ ]
to re-connect. Touch [ ] to return BT menu.
Pairlist
Nokia 5300
Incoming Phone Waiting
(if the mo bil e phon e ha s this funct ion
depending on the type of mobile phone)
In the mode of communication or BT AUDIO
(MUSIC PLAYING), if there is a call coming
in, the TFT screen will appear “Answer?”. If
you touch [
] or press [ ] key on the
remote control to stop communication you are
making, and receiving the incoming phone.
If you touch [
] or press [ ] key on the
remote control to reject the incoming call, and
resume the former communication.
Dial
Press [ ] on the BT menu to show number
pad, then input the phone number by touching
the number key on the screen, press [
]
to delet a digit, press [
] to dial out. If you
want to exit the number pad, touch [
].
Voice Transfer
During talking, touch [ ] to transfer audio
from the unit to your mobile phone, press
again to transfer back to the unit.