Operation Manual

EN - 15
Note:
Some mobile phones will transfer audio from
the unit to themselves once the incoming call
is answered.
BT Audio
(if the mobile phone has the A2DP & AVRCP
functions)
After pairing successfully, in the mode of
Bluetooth main menu, open the audio player of
your mobile phone and set the transmit mode
to Bluetooth. At this time, the unit screen will
appear “Music Playing”, and the audio will be
transferred from the mobile phone to the unit.
Some mobile phones may instruct to connect
with the unit. After found the Bluetooth device
name “CALIBER” on mobile phone, you
should select to connect it, and then input the
pairing code (“1234” by default). When music
playback, you can touch [ ] to switch to
play/pause, and touch [ / ] to control
same as the [ / ] key on the front
panel and remote control (if the options are
available).
LOG
After pairing successfully, in the mode of
Bluetooth main menu, touch [
] to visit
dialling history of your mobile phone.
Log
Phone book
Sim Phonebook
14. Previous/next page
15. Dial
16. Hang up
17. LOG root menu
18. Received call
19. Dialed call
20. Missed call
21. Return to BT main menu
Bluetooth Operation
BT MENU General Operation
Press the [ SRC ] button on the panel or the
touch key to enter Source main menu, touch
[SET] button on the screen to enter the unit
system setting menu, then touch Bluetooth
icon to enter BT menu.
1. Pair On/Off
Set the automatic pairing On/Off. If select
On, touch top left of the screen to return to
BT main menu. “Connecting...” will appear
on the screen.
2. Auto Link On/Off
Set the automatic link On/Off.
When “Auto Link On” and “Pair ok”, if the
distance is over 10 metres, the connection
will end. The Bluetooth technology will
automatically establish a connection
between the unit and the registered mobile
phone when the transmission distance
is 10 metres or shorter. When “Auto Link
Off”, the connection will not be established
automatically.
When “Auto Link On” and “Pair ok”, if
in the Bluetooth main menu, long touch
[ ] will end the connection of the
mobile phone and the unit, and after 10
seconds, the connection will establish
again automatically. When “Auto Link Off”,
the connection will not be established
automatically.
Whether the “Auto Link” is set On or Off,
when power is off then on again, the unit
Bluetooth will connect the mobile phone
(the Bluetooth function turning on) which is
“Pair ok” last time.
3. Automatic Answer On/Off
Set the automatic answering a call On/Off.
When “Auto Ans On” and “Pair ok”, if there
is an incoming call, in 30 seconds, the unit
will answer automatically, and voice will be
transferred to the unit too.
When “Auto Ans Off” and “Pair ok”, if there
is an incoming call, the unit will not answer
automatically until you choose receiving or
rejecting.