Operation Manual
EN - 16
Music Mode
A2DP
A2DP is short for Advanced Audio Distribution
Profile. The mobile phones supporting this
function can transmit stereo audio, whereas
the ones not supporting this function can
transmit mono audio only.
AVRCP
AVRCP is short for Audio/Video Remote
Control Prole. The mobile phones supporting
this function can control the playback of a
Bluetooth audio player.
In the mode of the music player working,
if you want to make a phone call, you can
press the number keys on the mobile phone
or on the remote control, then touch [
] to
dial. At the same time the music player will
stop. After the call received, the voice will be
transferred to the unit. When the call end, the
TFT screen will appear “Music Playing”. Some
mobile phone may instruct whether resume to
playback.
If there is an incoming phone call, the music
player will stop, and the TFT screen will
appear “Answer?”. When the call ends, the
TFT screen will appear “Music Playing”. Some
mobile phone may instruct whether resume to
playback.
General Notes for Bluetooth
1. For N7X, N9X, PHILIPS, Sony Ericssion,
SAMSUNG mobile phones, during our test,
after the mobile phones appear connection
successful, the unit still appear waiting
for pairing. At this time you must find the
unit’s Bluetooth module name “CALIBER”
on the pairing list on your mobile phone
and select it. In the submenu, select
connecting, then the unit will appear “Pair
ok”. Otherwise, there is no voice coming out
when communicating, though the mobile
phone has already displayed “Pair ok”.
Some mobile phones, such as PHILIPS,
when it playbacks A2DP, you must in its
playback mode, nd the unit’s “CALIBER”
and reconnect (check your mobile phone
whether has the A2DP & AVRCP functions).
2. Wh en pai ring , some types of mobil e
Bluetooth Operation
phone can instruct you how to operate,
for example, when you make a phone call
with the unit, but no voice comes out, it is
because the mobile phone voice doesn’t
be transferred to the unit. The SAMSUNG
mobile phone can instruct voice should be
transferred to Bluetooth device.
3. Depending on the mobile phone, if private
mode i s sele cted, when you make a
phone call with the unit, when received,
the voice can be transferred to the mobile
phone. But sometime the Bluetooth maybe
disconnect till the communication ends, and
connects your mobile phone and the unit
automatically. Some mobile phones maybe
require you to perform again the pairing
operation.
4. For mobile phone, the Bluetooth device
name must be primary symbols or numbers.
Otherwise, some unpredictable issues
may occur during the Bluetooth devices
connecting and making phone call.
5. A fter “Pair o k”, if the re is no so un d
produced, please check the Bluetooth
stereo audio whether is switched to on or
off.
Other Modes
AV mode
External peripheral devices with RCA audio
and video outputs can be connected with the
unit.
For more details, please refer to < Electrical
Connections Overall Diagram >.