Owner's Manual
Table Of Contents
- Introduction
- Important Safety Instructions
- Locations of Important Labels
- Air Compressor COMPONENTS
- Pre-Operation Checklis
- Package Contents & Assembl
- Inspect for Damag
- Save Packagin
- Compressor Locatio
- Electrical Power
- Operating the Air compressor
- Introduction
- Assembly
- Test Run
- Daily Operation
- Maintenance
- Draining the Air Tank
- Changing the Air Filter
- Testing for Leaks
- Pressure Switch
- Cleaning
- Storage
- Troubleshooting
- Specification
- Electrical Circui
- Air Passage Drawin
- Warrant
8 Customer Support: 1-866-409-4581
AIR COMPRESSOR
PRE-OPERATION CHECKLIST
Package Contents & Assembly
Model: 15020C
Package contents:
Air Compressor
Owner's Manual
(2) Air Filters
Wheel Assembly Kit
2 - #56 Wheel Bolt
2 - #68 Washer
2 - #57 Wheel
2 - #68 Washer
2 - #70 Nut
2 - #69 Bolt
2 - #68 Washer
2 - #67 Cushion Foot
2 - #68 Washer
2 - #70 Nut
Assembly:
Install the Air Filter
1. Attach the air filters to the top right side of motor head.
(looking from the front to the back of the air compressor )
Screw the air filter into the motor head port
Install the Wheel Kit
1. Slide Bolt #56 through Wheel #57..
2. Slide the washer #68 onto Bolt #56.
3. Slide the bolt #56 through the wheel support hole
located on the back bottom of the air compressor tank.
4. Attached the Washer #68 and Nut #70 to the Bolt #56 and
tighten firmly.
5. Repeat steps 1-3 to assemble the other wheel.
6. Slide Bolt #69 through Washer #68 and Cushion Foot #67.
7. Slide Bolt #69 through cushion foot support hole located on
the front bottom of the air compressor..
Attach Washer #69 and Nut #70 to Bolt # 69 firmly tighten.