Product Manual

9
Customer Support: 1-866-409-4581
AIR COMPRESSOR
Electrical Power
Electrical Power Requirements
Before using the air compressor, refer to the serial label for
voltage and amperage requirements. Make sure you have a
sufficient electrical supply for supporting the motor's requirements.
Use a dedicated 220 Volt 60 Hertz circuit
208 Volts requires a buck boost transformer
Low voltage and/or an overload circuit can cause the motor's
overload protection system circuit breaker to trip.
NEMA L6-30R Outlet (receptacle) is required.
OPERATING THE AIR COMPRESSOR
Save this manual for future reference.
Introduction
This air compressor features a compact structure, stable,
performance, a high airflow rate, easy operation and low
maintenance. Because the air compressor produces no oil in the
airflow, it can be used for air supplies that need oil-free air. The
motor directly drives the pistons and does not need any
lubrication or oil to function for a long period of time.
Assembly
1. Attach the air hose to the 1/2” NPT Female Port located on the
right end of the air compressor air tank.
2. Install the (6) air filters into the 6 ports located on the top right
and left of the motor heads.
3. Make sure the manual drain valve is in the off position and that
the air compressor power switch is in the OFF position
4. Ensure that the power supply you are going to use is operating
normally. Use a dedicated ( 220 Volts 60 Hertz) outlet.
208 Volts requires a buck boost transformer
5. Insert the power supply cord into a NEMA L6-30R (receptacle)
6. Extension cords are not recommended.
DANGER
DANGER
There is a danger of electric shock.
There is a danger of electric shock.
Use only undamaged electrical cords.
Use only undamaged electrical cords.
DO NOT touch bare wires or receptacles.
DO NOT touch bare wires or receptacles.
DO NOT operate air compressor in wet weather or in wet
DO NOT operate air compressor in wet weather or in wet
conditions.
conditions.
DO NOT touch air compressor or cords if hands or feet are
DO NOT touch air compressor or cords if hands or feet are
wet.
wet.
Ensure that all cords are free of damage before connecting
Ensure that all cords are free of damage before connecting
to the power supply.
to the power supply.
Ensure that you have a sucient electrical supply for
Ensure that you have a sucient electrical supply for
supporting the requirements of the motor.
supporting the requirements of the motor.
Improper installation of the grounding plug is able to result
Improper installation of the grounding plug is able to result
in a risk of electric shock. When repair or replacement of the
in a risk of electric shock. When repair or replacement of the
cord or plug is required, do not connect the grounding wire
cord or plug is required, do not connect the grounding wire
to either at terminal. The wire with insulation having an
to either at terminal. The wire with insulation having an
outer surface that is green with or without yellow stripes is
outer surface that is green with or without yellow stripes is
the grounding wire.
the grounding wire.
This product must be grounded. In the event of an electrical
This product must be grounded. In the event of an electrical
short circuit, grounding reduces the risk of electrical shock
short circuit, grounding reduces the risk of electrical shock
by providing an escape wire for the electric current.
by providing an escape wire for the electric current.
This product is equipped with a cord having a grounding
This product is equipped with a cord having a grounding
wire with an appropriate grounding plug. The plug must be
wire with an appropriate grounding plug. The plug must be
plugged into an outlet that is properly installed and
plugged into an outlet that is properly installed and
grounded in accordance with the local codes and
grounded in accordance with the local codes and
ordinances.
ordinances.
This product is for use on a nominal 220-V circuit and has a
This product is for use on a nominal 220-V circuit and has a
grounding plug similar to the plug illustrated in sketch A.
grounding plug similar to the plug illustrated in sketch A.
Only connect the product to an outlet having the same
Only connect the product to an outlet having the same
conguration as the plug.
conguration as the plug.
Do not use an adapter with this product.
Do not use an adapter with this product.
SHOCK
SHOCK