7. 4 USER OPERATION INSTRUCTION (DRAFT) MULTI-REMOTE CONTROL SYSTEM It is possible to lock/unlock all doors and activate the panic alarm by using the remote controller (transmitter) from outside the vehicle. Before locking the doors, make sure the keys is not left in the vehicle. The remote controller can operate at a distance of approximately from the vehicle (The effective distance depends upon the conditions around the vehicle.) As many as four remote controllers can be used with one vehicle.
Locking doors 1. Remove the ignition key. *1 2. Close all doors. *2 3. Push the LOCK button on the multi-remote controller. 4. All door will lock. All of the doors will lock when the LOCK button on the multi-remote controller is pushed even though a door remains open and/or the ignition key is in the ON position. 5. The hazard indicator flashes twice and the horn chirp once.
-All doors unlock. -The hazard indicator flashes once if all doors completely closed. The interior light can be turned off without waiting for 30 seconds by turning the ignition switch to the on position or by locking the doors with the multi-remote controller. Releasing the trunk lid 1. Push the trunk lid button on the multi-remote controller for longer than 0.5 second with the key removed from the key cylinder. 2. The trunk lid opens.
-The remote controller is water-proof, however, if it get wet, immediately wipe completely dry. -When changing batteries, do not let dust or oil get in the controller. FCC Notice: Changes or modifications not expressly approved by the manufacturer for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules and Regulation and the Standard RS-210 of Industry Canada.