User Guide

PMP 450 Planning Guide
AP interfaces
The AP interfaces are illustrated below.
Figure 4 AP interfaces – 2.4 GHz, 3.5 GHz, 3.6GHz, 5 GHz
Table 2 AP interface descriptions and cabling – 2.4 GHz, 3.5 GHz, 5 GHz
Interface Function Cabling
Path A RF
Port
2.4 GHz -45 degree RF connection to AP antenna
50 ohm RF cable, N-type
3.5 GHz -45 degree RF connection to AP antenna
3.6 GHz -45 degree RF connection to AP antenna
5 GHz Vertical RF connection to AP antenna
Path B RF
Port
2.4 GHz +45 degree RF connection to AP antenna
50 ohm RF cable, N-type
3.5 GHz +45 degree RF connection to AP antenna
3.6 GHz +45 degree RF connection to AP antenna
5 GHz Horizontal RF connection to AP antenna
Sync / Default GPS synchronization signaling provides
power to UGPS module and is the default
plug port.
RJ11 cable, default plug.
Power-over-Ethernet,
Ethernet communications
(management and data)
Power-over-Ethernet, Ethernet
communications (management and data)
RJ45 cable
Path A RF Port
Sync/Default
Ethernet
Path B RF Port
pmp-0047 (March 2014)
1-17