User Guide

Table Of Contents
PMP 450 Planning Guide
Figure 6 AP ground and equilibrium membrane vent
The ports on the 3.5GHz and 3.6GHz APs are slightly different.
Table 4 AP interface descriptions and cablingground lug
Interface Function Cabling
Ground Lug (bottom of unit) For grounding the unit 10 AWG copper wire
AP diagnostic LEDs
The diagnostic LEDs report the following information about the status of the module.
The LED color helps you distinguish position of the LED. The LED color does not indicate any status.
Figure 7 AP diagnostic LEDs, viewed from front of the unit
PWR SYN/1 SES/2 GPS/3 ACT/4 LNK/5
AP Ground
Equilibrium Membrane Vent
(do not cover)
pmp-0047 (March 2014)
1-19