User Guide

PMP 450 Planning Guide
5 MHz Channel 134.1 134.1 128.3 121.3 113.1
Table 15 Link Budget Details – Dynamic Rate Adapt, 5.4GHz PMP 450 AP and PMP 430 SM
Product Parameter
Performance Details
1x
2x
3x
PMP 450 AP
§§§****
PMP 430 SM
Modulation QPSK-SISO 16-QAM-SISO 64-QAM-SISO
5.4GHz Max. LOS
Link Budget (no fade
margin) – 20 MHz
channel bandwidth
with Integrated SM
antenna
6.3 mi / 10.08 km 2.9 mi / 4.64 km 1 mi / 1.6 km
with Reflector Dish
that adds 14 dB to SM
Range
7.5 mi / 12 km 3.8 mi / 6.08 km 1.7 mi / 2.72 km
5.4GHz Max. LOS
Link Budget (no fade
margin) – 10 MHz
channel bandwidth
with Integrated SM
antenna
5.3 mi / 8.48 km 2.7 mi / 4.32 km 1 mi / 1.6 km
with Reflector Dish
that adds 14 dB to SM
Range
7.5 mi / 12 km 3.4 mi / 5.44 km 1.5 mi / 2.4 km
5.4GHz Max. LOS
Link Budget (no fade
margin) – 5 MHz
channel bandwidth
with Integrated SM
antenna
6.7 mi / 10.72 km 2.9 mi / 4.64 km 0.9 mi / 1.44 km
with Reflector Dish
that adds 14 dB to SM
Range
7.5 mi / 12 km 3.4 mi / 5.44 km 1.5 mi / 2.4 km
5.4GHz Max.
Aggregate Throughput
with 1/16 Cyclic
Prefix to 1 SM
(75%/25% DL/UL
Ratio) – RF Link Test
20 MHz Channel:
(up+down)
13 Mbps 28 Mbps 48 Mbps
10 MHz Channel:
(up+down)
6 Mbps 12 Mbps 20 Mbps
5 MHz Channel:
(up+down)
2 Mbps 4 Mbps 7 Mbps
5.4GHz Nominal Per-
Chain Receive SM
RX Sensitivity
(including FEC)
††††
20 MHz Channel -87 dBm -80 dBm -74 dBm
10 MHz Channel -89 dBm -83 dBm -77 dBm
5 MHz Channel
-94 dBm
-87 dBm
-80 dBm
Link Budget,
Integrated (dB)
20 MHz Channel 127.3 120.4 111.3
10 MHz Channel 125.8 119.8 111.5
5 MHz Channel
127.8
120.4
110.3
§§§
Maximum setting of Max Range parameter is 40 mi.
****
Transmit power complies with FCC regulatory requirements.
††††
PMP 450 devices include a dual polar antenna; Channel A (Vertical) and Channel B (Horizontal). Listed receive
sensitivity corresponds to single-channel readings.
1-46
pmp-0047 (March 2014)