User Manual

Instruction Manual CS-
Styx
2
Thank you for purchasing a Cambo product
The Cambo CS system complies with the “Arriflex
®
15mm Light Weight” standard.
This means the CS system is compatible with parts of other brands using the 15mm
light weight standard. The 15mm light weight standard characteristics are: 15mm iris
rods that are positioned 60mm apart and 85mm below the optical axis.
The Styx-rig is designed as a compact DSLR/DV rig. The handle offset and angle are
adjustable as for the distance between the shoulder pad and DSLR/DV.
Due to the modular character of the Cambo rig system, the user is fully in charge of
customizing the rig to his or her personal preferences.
The Styx-rig can be used with any follow-focus and/or matte box, this rig
configuration centers the weight of the rig on the handle axis.
Warnings
 Before loosening a clamp knob, ensure that the loosened part of the rig is
supported.
 Do not tighten the clamp without a rod inserted. This can deform and damage
the clamp.




 Always check, after (re)assembly of the rig, if the clamps connecting the rods
are well tightened.
 Do not lift the rig while holding only one handle. This could lead to excessive
force momentum on the handle joint, causing it to shift.