ASSEMBLY INSTRUCTIONS 6 PC TEAK DINING SET IT-610048TH CUSTOMER SERVICE INFORMATION attach the purchase receipt and picture of damaged parts. Toll free number : 1-888-287-4275 from 9:00 am to 5.00pm CST (Monday to Friday). For faster response, please write down item number, code for missing parts, Please email us at for assembly tips, report damage, or request parts.
GENERAL INFORMATION & TIPS 1. Please read the assembly instructions prior to assembling the table. 2. To avoid damage, assemble the table on a non-abrasive surface such as carpet. 3. Make sure all bolts tightly fastened before the table is used. 4. This table is not for commercial use. Please make sure you have all parts before beginning assembly. Please wait until all steps are completed before tightening bolts. Allen wrench. For tightening all bolts. It's included in hardware list.
Put the table (A) face down on a fiat non-abrasive surface. Attach the leg frames (B) into table top (A} and secure using washers (G), spring washers (F) and 2 3/4" bolts (D) as diagram shown. ** DO NOT TIGHTEN ALL BOLTS YET. Next, attach the cross bar (C) into per-assembled leg frames (B) and insert 1 1/2" blats (E}) into prevailed holes as shown. Make sure all parts are correctly connected and tighten all bolts completely using Allen wrench. Tum the table upright.
GENERAL INFORMATION & TIPS 1. Please read the assembly instructions prior to assembling the chair. 2. To avoid damage, assemble the chair on a non-abrasive surface such as carpet. 3. Make sure all bolts tightly fastened before the chair is used. 4. This chair is not for commercial use. Please make sure you have all parts before beginning assembly. Please wait until all steps are completed before tightening bolts. 1. 8" Philips screwdriver For tightening all bolts and screws. 2.
STEP 1 Attach the apron (D) into bottom of seat (C) and secure using 2 1/4" bolts (B). ** DO NOT TIGHTEN BOLTS YET. STEP 2 Attach right and left side frames (A1 & A2) into back support (B). Secure using 1" bolts (F). ** DO NOT TIGHTEN BOLTS YET. STEP 3 Next, attach the per-assembled seat into right and left side frames (Al & A2). (The seat with apron must be attached in front). Secure seat using 1" bolts (F) as shown.
GENERAL INFORMATION & TIPS 1. Please read the assembly instructions prior to assembling the chair. 2. To avoid damage, assemble the chair on a non-abrasive surface such as carpet. 3. Make sure all bolts tightly fastened before the chair is used. 4. This chair is not for commercial use. Please make sure you have all parts before beginning assembly. Please wait until all steps are completed before tightening bolts. 1. 8" Philips screwdriver For tightening all bolts and screws. 2.
STEP 2 7 Attach right and left side frames (A1 & A2) into back support (B). Secure using 1" lobs (F). Make sure all parts are correctly connected and tighten all %* DO NOT TIGHTEN BOLTS YET. bolts completely using screwdriver. STEP STEP Tapping in the wooden caps (G) to cover bolts head using rubber mallet. THE CHAIR IS NOW READY FOR USE. Next, attach the per-assembled seat into right and left side frames (Al & A2). (The seat with apron must be attached in front). Secure seat using 1" bolts (F) as shown.
CARE MAINTENANCE Due to teak wood's natural characteristics, wood color and grain variations may be present. This is a symbol of the originality of each unit and gives each finished piece a distinctive look and inherent charm. UNFINISHED NATURAL TEAK WOOD Teak Wood, when left bare and unfinished, will naturally fade to a silver-gray color. This transformation does not in any way affect the functionality and durability of the furniture.
1 Year Limited Warranty This warranty is a limited warranty. Regular care and maintenance are required to maintain the warranty. Warranty is to the original purchaser when items are purchased from one of our authorized retailers and is not transferable. If a product fails and is under the terms of our limited warranty, the item will be replaced with a small fee when applicable. In the case of discontinued models, an item of similar quality and style will be offered to the customer.