Use and Care Guide

CONTROL
BUTTONS/FUNCTIONS
Master
Power Button
snottuB lortnoC
FLAME COLOR AND BRIGHTNESS ADJUSTMENT
Press this button to change the flame color.
There are 5 colors F1 to F5 .
Press the button to change the color. It appears the related flame number on the digital screen.
Press the button for 3 seconds to change the flame brightness.
There are 5 levels L5 to L1.It appears the related flame number on the digital screen.
HEAT
ER SETTINGS
This firepla
ce insert consists of a fan forced el
ectric heater with two heater
settings, 800
W(L) or 1,50 .
Note:
the fan may
continue
continue to run for a short time after the heater is turned off.
The fan will turn off automatically.
TIMER
This electric fireplace is equipped with a timer ranging from 1 hour to 9 hours.
Press the timer button on the insert panel once for 1 hour, twice for 2 hours etc
(the digital screen appears from ‘1H
’ to ‘9H ’ when settings, and so on).
1
2
4
4
POWER
ON/OFF BUTTON
Press the button once to turn on the power.
Press the button again to turn off all functions.
5
DISPLAY WINDOWS
1
2
3
5
0W(H)
3
6
Press the button once (the digital screen shows ‘Lo’ ).
Pressthe button a second time (the digital screen shows ‘HI ’ ).
Press the button a third time to turn the heater off.
Power ON\OFF:(The master power switch must be "on")Power to the unit.