Use and Care Manual

Assembly (continued)

□

Attach the metal brackets(S) to all three

sides of the firebox and two sides of the

mantel to ensure that your firebox does

not move around as you use it. all three

trims attach to the firebox by inserting and

tightening two screws(PP). both the left and right

side trim attach to the mantel front by inserting and t

ightening two screws(PP) one spare screw is included

Insert the firebox insert(P) into the mantel from

the rear. be very careful not to scratch the base(B)

Viewing from the front of the mantel, ensure that the

firebox insert(P) is in the center of the opening