MANTEL MODEL X7233-1CHR X7233-1MAH X7233-1TEK X7233-1WHT X7233-1BLK X7233-1WAL X7233-1GRY 1 REV19-01
Note: This item has 2 cartons (Carton A and Carton B) Carton A (X7233-1A) has Part A and Part G Carton B (X7233-1B) has all other parts PACKAGE CONTENTS A B C D E F G H I J K L2 M1 2 L1 M2
Note: This item has 2 cartons (Carton A and Carton B) Carton A (X7233-1A) has Part A and Part G Carton B (X7233-1B) has all other parts PACKAGE CONTENTS N O P G1 Q1 Q3 Q2 Q4 HARDWARE CONTENTS AA BB Bolt Qty. 28 Metal Connector Qty.28 CC Screw M4x16 Qty. 20 DD EE Screw M4x25 Qty. 4 Shelf Pin Qty. 16 SS Safety Chain Qty.
PACKAGE CONTENTS PART DESCRIPTION QTY.
PACKAGE STEPS 1. AA X8 A 2.
PACKAGE STEPS 3. C BB X2 4.
PACKAGE STEPS 5. E CC X3 6.
PACKAGE STEPS 7. G DD X4 8.
PACKAGE STEPS 9. H BB X4 10.
PACKAGE STEPS 11. AA X4 EE X4 12.
PACKAGE STEPS 13. EE X4 K BB X2 14.
PACKAGE STEPS 15. M1 M2 16.
PACKAGE STEPS N 17. BB X4 18.
PACKAGE STEPS 19. BB X4 20.
PACKAGE STEPS 21. P BB X4 22.
PACKAGE STEPS IMPORTANT - Safety Chain Installation WARNING: This mantel is heavy furniture. Please be sure to correctly attach the safety chain to both the mantel and an adjacent wall. Failure to do so can cause serious injury or death. INSTALLATION: Assemble the mantel and place it in position Attach one end of the chain to a wall stud using the screw included Attach the other screw – through a link in the chain – to the center of the mantel’s top board (you may need to drill a small starter hole).
