Instructions / Assembly

ASSEMBLY INSTRUCTIONS

Hardware Used

x 4

Stainless steel bolt M6 X 10

4. Attach head assembly to post.

4-1. Unscrew four stainless steel bolts M6 X 10 (II).

4-2. Load head assembly by inserting hose into post.

Insert head assembly into post.

Control knob should be above decal on post.

Attach head assembly to post, and loosely install four

stainless steel bolts M6 X 10. Tighten bolts securely.

4-1

4-2

5. WARNING:Remove protective cover before

assembling.

Note: If necessary for proper alignment of reflector

sections, loosen each bolt prior to further assembly

and retighten after sections are aligned.